CleanMaster HydraBoost CT

Item # HM-HBCT-6.5LB-4PK | Mfr. Model # 950-782-B


  • Pre Spray
  • High Powered Powder Enzyme
  • pH 11.0 – 12.0
  • Tile & Grout Floors and Surfaces
Cases Ship Free

SDSSHEET PRODUCTINFO SHEET FRONTLABEL


 

From: $49.50

Clear

Powder High Powered Concrete and Tile Cleaner and Degreaser/ Booster Additive

HydraBoost CT is a powder, high powered concrete and tile and grout cleaner and degreaser designed to safely and effectively dissolve, break down, dislodge, and emulsify even the grimiest soils from concrete, finished concrete, ceramic, porcelain, and quarry tile floors and surfaces. HydraBoost CT is an economical cleaner and degreaser designed to penetrate porous surfaces and dissolve the toughest build-up of oil and grease. Alkaline cleaning agents and heavy duty surfactants are activated by the power of oxygen to allow the effervescent solution to get into every crack, crevice, and pore. It is the ideal cleaning agent for heavily soiled restaurant kitchen tile floors and other indoor and outdoor surfaces exposed to high levels of grease and oil contamination. It does so without the use of harsh chlorinated solvents or mineral spirits, leaving the surface squeaky clean and residue free.

HydraBoost CT is specifically designed to work in conjunction with high powered hard surface cleaning wands such as the RX-20 with hard floor attachments, and rotary or stationary hard surface cleaning extraction wands. Its powerful formula though, will work with virtually any brush agitation system, automatic floor scrubber, or even a mop and bucket cleaning system. HydraBoost CT is designed to be used as a preconditioning agent and applied to the surface being cleaned first. The oxygenated cleaning power of HydraBoost CT also makes it an ideal boosting agent for trashed and neglected carpet that has been exposed to high levels of oxygenated oils and grease. Simply add a couple of ounces of HydraBoost CT to your favorite traffic lane cleaner/preconditioner for the ultimate in cleaning power.

Directions as a pre-treatment/prespray for tile and grout floors:
1. Read entire label before using. Use only as directed.
2. This product is ultra-concentrated. For normal soiling, mix 2 ounces of HydraBoost CT powder
with one gallon of warm or hot water into a professional sprayer. For extreme soiling, mix
three to four ounces of powder with a gallon of warm of hot water into a professional sprayer.
For application through a Inline Injection Sprayer, mix 12 oz. of powder and fill container with
water. Use 4:1 dilution.
3. Apply mixed solution with sprayer evenly and liberally across surface to be cleaned. You can
use a pump-up sprayer or a battery powered sprayer. If preferred, you can apply mixed
solution with a damp mop, sponge, or other appropriate professional equipment. If using a
mop for solution application and surface cleaning, change your mop water often.
4. Allow for 5 -10 minutes of dwell time. For concrete, if stains have been deeply absorbed, allow
15 minutes of dwell time so the solution has time to reach into the concrete pores.
5. For best results, agitate and extract cleaning solution using warm or hot water and a rotary
agitation hard surface cleaner. For tight spaces or especially sensitive surfaces, use a hard
surface cleaning wand, or simply mop
to rinse with clean warm or hot water.
6. When area has been rinsed thoroughly,
allow floor to dry