Rug and Fabric Preconditioner

CleanMaster is pleased to provide you with a preconditioner/prespray specifically formulated to safely and effectively clean Oriental Rugs, Wool Rugs, Carpet, and Fabric; natural and cotton fiber rugs and fabric; and other investment textiles. WoolMaster combines specialized encapsulation surfactants, detergents, and conditioning agents to specifically target the soils that rugs and fabrics are commonly exposed to. Most “wool” and “fine fabric” cleaning agents are just pH reduced carpet prespray formulations or old shampoo formulas. WoolMaster brings state of the art technology to cleaning investment textiles. WoolMaster was formulated from the beginning for the specific purpose of effectively cleaning the most challenging rugs and fabrics, and meets and exceeds the safe standards for cleaning wool fibers and fabrics. WoolMaster is also formulated to match the versatility of the cleaning professional, working effectively at both “on-location” and “in-plant” cleaning set-ups. It can be applied like a typical prespray or used effectively in a rug washing pit. WoolMaster is super-concentrated, most often mixed 1:16-24. It has a slightly alkaline formula with a pH of 8.0 -8.5.

• CleanMaster is pleased to provide you with a preconditioner/prespray specifically formulated to safely and effectively clean Oriental Rugs, Wool Rugs, Carpet, and Fabric; natural and cotton fiber rugs and fabric; and other investment textiles.
• WoolMaster combines specialized encapsulation surfactants, detergents, and conditioning agents to specifically target the soils that rugs and fabrics are commonly exposed to.
• Most “wool” and “fine fabric” cleaning agents are just pH reduced carpet prespray formulations or old shampoo formulas. WoolMaster brings state of the art technology to cleaning investment textiles. WoolMaster was formulated from the beginning for the specific purpose of effectively cleaning the most challenging rugs and fabrics, and meets and exceeds the safe  standards for cleaning wool fibers and fabrics.
• WoolMaster is also formulated to match the versatility of the cleaning professional, working effectively at both “on-location” and “in-plant” cleaning set-ups.
• It can be applied like a typical prespray or used effectively in a rug washing pit. WoolMaster is super-concentrated, most often mixed 1:16-24. It has a slightly alkaline formula with a pH of 8.0 -8.5.
• Available Sizes: gallon

Directions:
Pre-Cleaning Procedures for all Rugs

1.     Read entire label before using. Use only as directed.

2.     Carefully pre-inspect the rug, fabric, or carpet before proceeding. Identify fiber content, construction, dye stability, shrinkage considerations, and pre-existing damage. Always test every rug for dye bleeding potential. Carefully look for conditions which could contribute to cleaning related challenges such as pre-existing pet urine, water damage, fiber deterioration, past cleaning residues, and fringe discoloration. Follow industry recommended cleaning procedures and standards of care.

3.    The preferred method for cleaning investment textile rugs is in-plant.

4.    If cleaning on-location, proper preparation of the work area must include:

a.     Make sure there is adequate airflow for drying and ventilation.

b.     Adequate and safe work area where you can safely move the required cleaning equipment and tools around and the rug can be safely cleaned on the floor without causing damage to or from other surfaces which might bleed color when moist or wet.

c.    Always keep white, cotton, colorfast towels handy to wipe up any cleaning solution overspray which may get on other surfaces

5.     Prior to wet cleaning, remove as much dry soil as possible from the rug utilizing a vacuum (with a beater bar), portable rug dusting unit, compressed air system, or automated duster. Follow equipment manufacturer directions.

On-Location Cleaning

1.       Follow all directions as called for in the Pre-Cleaning Procedures Section

2.       WoolMaster should be used as a preconditioner for soiled rugs.

a.    For use with Pump/Electric Sprayers: Mix 6 oz. of WoolMaster with 1 gallon hot water (1 to 24). For exceptionally heavy soil, mix 8 ounces of solution per gallon of water (1-16). Spray until carpet or fabric is damp. Do not allow carpet or fabric to dry before extraction.

b.     For use with In-Line Injection Sprayer: For use with regular 1-8 Hydro-Force Pro Sprayer, mix1 partWoolMaster to 2 parts water in five quart container. Apply evenly across carpet. Do not over-apply solution. Do not allow carpet to dry before extraction.

3.    For extraction rinse, mix Rinse Out in solution tank of extraction unit according to the following directions

a.    Portable extractor: Mix 2 ounces of solution to five gal­lons of water in extraction tank.

b.    Truck mount: Mix one quart solution (32 ounces) with five gallons of water into solution container. Set solu­tion flow meter between 2 and 3.

4.    Cleaning fringes constructed of cotton fiber may require special solutions and cleaning application utilizingHydraBoost CT. Proceed to Fringe cleaning procedures if necessary.

5.    Speed dry utilizing axial, downdraft or centrifugal airmovers

6.    Groom or brush as needed.

In-Plant Cleaning

1.    Follow all directions as called for in the Pre-Cleaning Procedures Section

2.    WoolMaster can be used as a preconditioner for soiled rugs as a cleaning detergent in a rug wash pit.

a.    For use with Pump/Electric Sprayers: Mix 6 oz. of WoolMaster with 1 gallon hot water (1 to 24). For exceptionally heavy soil, mix 8 ounces of solution per gallon of water(1-16). Spray until rug is damp. Do not allow rug to dry before extraction.

b.    For use as a cleaning detergent in rug wash pit: Use solution in accordance with industry standards of care according to fiber content, construction, and dye stability. Mix 6 to 12 ounces of solution with each gallon of water depending upon soiling levels. Agitate with appropriate brushes either mechanically or by hand.

3.    Rinse off rug with clear water. For natural fibers, use warm or cold water.

4.     Cleaning fringes constructed of cotton fiber may require special solutions and cleaning application utilizingHydraBoost CT. Proceed to Fringe cleaning procedures section if necessary.

5.     If utilizing extractor, wringer, or centrifuge, follow machine instructions. Hang on rack according to instructions. Speed dry utilizing downdraft or centrifugal air movers. Consider use of heat drying or dehumidification equipment based upon room temperature, humidity levels, and rug construction

6.    Groom or brush as needed.