PRS Water Damage PreClean

Where to Use
PRS Water Damage PreClean is a biologically based initial treatment for water damage claims, especially category 3 (black water). It digests odors and soils, including those from fecal matter and
urine, reducing them to water and carbon dioxide. PRS Water Damage PreClean utilizes spore strains and advanced cleaning technology specifically engineered for water damage claims. It is also designed
for areas of heavy pet urine and soils from trauma.

Benefits
• Non Toxic
• Biologically Based
• No Hazardous Ingredients
• Highly Concentrated

PRS Water Damage PreClean can help achieve timely and productive results for restoration professionals in water damage. This product will work from the moment you arrive until removal of
enough water during the cleaning process limits its biological activity. It also eliminates the worst odors from water and category 3 (black water) damage shortly after application. Conventional odor control is not
required. Do not introduce any non-PRS chemistry while PRS Water Damage products are at work. Apply as soon as possible. PRS Water Damage PreClean eliminates odors within the location,
liquefies solids in black water, starts the organic digestion process in all areas of sustained moisture, and minimizes odors within clean up equipment used by the contractor (i.e. wet vacs etc.). In the
event of a ‘Major Cat” PRS Water Damage PreClean can be used as a ‘stop-gap’ to control odors and soil load until a cleanup crew is available.

Directions for Use:

Shake well before use. Do not use below 50°F.

Standing category 3 (black water)/heavy load:
Apply 2 gallons PRS Water Damage PreClean per 400 sq. ft per one foot
depth. (1 gallon/1500 gallons of black water) (3.8 litres/5700 litres).

Standing category 3 (black water)/moderate load:
Apply 1 gallon (3.8 litres) PRS Water Damage PreClean per 400 sq. ft per one foot depth
(or 1 gallon/3000 gallons of black water) (3.8 litres/11,400 litres).

Dried or Moist Load:

Dilute 1 gallon (3.8 litres) PRS Water Damage-PreClean with at least 1 gallon (3.8 litres) of water. For example, fill a 2 gallon pump up sprayer with 1 gallon (3.8 litres) of product and at
least 1 gallon of water. Apply until contained area is visibly wet. Reapply as required to maintain visible wetness. Depending on the surface and drying conditions, a 2 gallon pump up sprayer will cover 1000 sq ft.
Perform physical cleanup as per IICRC S-500 guidelines. Extract residual, remove contents, carpets etc. depending on class of contamination.
Clean/pressure clean all surfaces and then apply PRS Water Damage Post Clean as per guidelines. Start your drying process as soon as possible.